Event Schedule
This year the RAPID + TCT 2022 Content is available On Demand until November 1, 2022. Watch presentations from the Main Stage, SME ZONE, and Conference!
Day 1: Tuesday, May 17
-
access_time 10:00 - 10:25 AM EDT
Tuesday, May 17
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeU.S. Army Expeditionary Additive Manufacturing at the Point of Need
-
Matthew Brauer U.S. Army, DEVCOM - AC -
Thomas Vretis U.S. Army, DEVCOM-AC
-
-
access_time 10:00 - 10:25 AM EDT
Tuesday, May 17
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeStress Corrosion Cracking Behavior of LPBF AlSi10MG
-
Michael A. Pratt University of Dayton Research Institute
-
-
access_time 10:00 - 10:25 AM EDT
Tuesday, May 17
location_onRoom 142blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeAn End-to-End Digital Thread to Accelerate Additive Adoption
-
Nicholas J. Mulé The Boeing Company
-
-
access_time 10:00 - 10:25 AM EDT
Tuesday, May 17
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM EDT
Tuesday, May 17
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM EDT
Tuesday, May 17
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM EDT
Tuesday, May 17
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeData-Driven Quality Control of Laser Directed Energy Deposition (DED)
-
Melanie Lang, MEng FormAlloy Technologies, Inc.
-
-
access_time 10:30 - 10:55 AM EDT
Tuesday, May 17
location_onRoom 142blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeInsights Into Industrial AM Application and Implementation Challenges & Strategies for the Defense UAS Industry
-
Micah Baxter General Atomics Aeronautical Systems Inc.
-
-
access_time 10:30 - 10:55 AM EDT
Tuesday, May 17
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeAn Additive Solution to Fulfill Customer Needs
-
Giuseppe Lacaria Ford Motor Company
-
-
access_time 10:30 - 10:55 AM EDT
Tuesday, May 17
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeAdvancement of US Navy Sustainment Capabilities Through Solid-State Additive Manufacturing
-
Chase D. Cox, PhD MELD Manufacturing Corporation
-
Stephen Cox U.S. Navy
-
-
access_time 10:30 - 10:55 AM EDT
Tuesday, May 17
location_onRoom 140Eblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM EDT
Tuesday, May 17
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeAM of Shape Memory Alloys for aerospace, defense, and medicine: Key Challenges, Lesson Learned and the Path Forward
-
Mohammad Elahinia, PhD The University of Toledo
-
Mohammadreza Nematollahi, PhD University of Toledo
-
-
access_time 10:30 - 10:55 AM EDT
Tuesday, May 17
location_onRoom 140Bblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeRegulatory Landscape for Additive Manufactured Medical Devices — an Update for 2022
-
Dawn Lissy, MS Empirical Technologies Corp.
-
-
access_time 10:30 - 10:55 AM EDT
Tuesday, May 17
location_onRoom 140Cblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Tuesday, May 17
location_onRoom 140Eblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeUnrealized Value or Lurking Risks? Intellectual Property Opportunities and Threats in the Additive Manufacturing Industry
-
Gregory M. Stone, Esq. Whiteford, Taylor & Preston L.L.P.
-
-
access_time 11:00 - 11:25 AM EDT
Tuesday, May 17
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeLaser Additive Manufacturing of High Reflectivity Metallic Materials Using Pore-Free Non-Equiaxed Powders
-
John E. Barnes The Barnes Global Advisors
-
Mihaela Vlasea, PhD University of Waterloo
-
-
access_time 11:00 - 11:25 AM EDT
Tuesday, May 17
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeEvaluation of Printed Wax Pattern Molds
-
Thomas J. Mueller Mueller Additive Manufacturing Solutions
-
Elvira Stesikova, PhD BASF Forward AM
-
-
access_time 11:00 - 11:25 AM EDT
Tuesday, May 17
location_onRoom 140Bblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Tuesday, May 17
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeAdditively Manufactured Topology-Optimized Reflective Optics
-
Matthew E. Lynch, PhD Raytheon Technologies Research Center
-
David Busacker nTopology
-
-
access_time 11:00 - 11:25 AM EDT
Tuesday, May 17
location_onRoom 140Fblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Tuesday, May 17
location_onRoom 140Dblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Tuesday, May 17
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeCurrent State of Additive Manufacturing in Forensic Science
-
Corey W. Scott, M.S.F.S. Federal Bureau of Investigation (FBI)
-
-
access_time 11:30 - 11:55 AM EDT
Tuesday, May 17
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Tuesday, May 17
location_onRoom 140Fblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Tuesday, May 17
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeOptimization of Ti-6Al-4V Fused Filament Fabrication With Vacuumless Sintering
-
James Siegenthaler, PhD Fraunhofer USA Center Midwest
-
-
access_time 11:30 - 11:55 AM EDT
Tuesday, May 17
location_onRoom 140Bblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeVat-Photopolymerization With Customizable Bioresorbable Resins for Medical Applications
-
Aaron Vaughn, PhD Poly-Med, Inc.
-
Mathew Stanford, MS Poly-Med, Inc.
-
-
access_time 11:30 - 11:55 AM EDT
Tuesday, May 17
location_onRoom 142blur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Tuesday, May 17
location_onRoom 140Eblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeCybersecurity for Additive Manufacturing
-
Nicole Santos BreakPoint labs
-
-
access_time 2:00 - 2:25 PM EDT
Tuesday, May 17
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeSmart Additive Manufacturing: Advanced Automation Solutions for 3D Printing
-
Chinedum ("Chi") Okwudire University of Michigan
-
Brenda Jones Ulendo
-
-
access_time 2:00 - 2:25 PM EDT
Tuesday, May 17
location_onRoom 140Dblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeAgile Manufacturing for Advanced Armaments Systems
-
James Zunino, SSTM US Army Comabt Capabilties Development Command
-
Dave Sabanosh US Army DEVCOM Armaments Center
-
-
access_time 2:00 - 2:25 PM EDT
Tuesday, May 17
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM EDT
Tuesday, May 17
location_onRoom 141blur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeHybrid Manufacturing – An Emerging and Blended Approach to Advanced Manufacturing
-
Brad Keselowski Keselowski Advanced Manufacturing
-
-
access_time 2:00 - 2:25 PM EDT
Tuesday, May 17
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM EDT
Tuesday, May 17
location_onRoom 140Cblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeIndustrialization of Additive Manufacturing - From Local Silos to Global AM Ecosystems
-
Alyssa Berger Siemens Digital Industries Software
-
-
access_time 2:00 - 2:25 PM EDT
Tuesday, May 17
location_onRoom 140Bblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM EDT
Tuesday, May 17
location_onRoom 140Fblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeDigital Material Fabrication Using Additive Manufacturing
-
Frank F. Liou, PhD Missouri University of Science and Technology
-
-
access_time 2:30 - 2:55 PM EDT
Tuesday, May 17
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeLearning From Other Domains: Leveraging Video Game Development Experience in a PoC 3D Lab
-
Parham Gholami Rady Children's Hospital-San Diego
-
Justin Ryan, PhD Rady Children's Hospital San Diego
-
-
access_time 2:30 - 2:55 PM EDT
Tuesday, May 17
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeAccelerate Adoption of 3D Printed Sand and Wax for Complex Metal Castings
-
Jiten Shah Product Development & Analysis (PDA) LLC
-
-
access_time 2:30 - 2:55 PM EDT
Tuesday, May 17
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeA Closed-Loop Machine Learning and Compensation Framework for Accuracy Control in 3D Printing
-
Arman Sabbaghi, PhD Purdue University, Department of Statistics
-
Wenbin Zhu Purdue University Department of Statistics
-
-
access_time 2:30 - 2:55 PM EDT
Tuesday, May 17
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM EDT
Tuesday, May 17
location_onRoom 140Cblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM EDT
Tuesday, May 17
location_onRoom 142blur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM EDT
Tuesday, May 17
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM EDT
Tuesday, May 17
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM EDT
Tuesday, May 17
location_onRoom 141blur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeProducing Castings Using 3D Sand Printing
-
Dave Rittmeyer Hoosier Pattern Inc.
-
-
access_time 3:00 - 3:25 PM EDT
Tuesday, May 17
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeAdditive Manufacturing of Smart Materials
-
Ala Qattawi, PhD University of Toledo
-
-
access_time 3:00 - 3:25 PM EDT
Tuesday, May 17
location_onRoom 140Dblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeLiquid Deposition of a Dynamic Polymer Thermoset and Associated Nanocomposites
-
Frank Gardea, PhD DEVCOM Army Research Laboratory
-
-
access_time 3:00 - 3:25 PM EDT
Tuesday, May 17
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeQualification of Additively Manufactured Aerospace Hardware
-
Humna Khan ASTRO Test Lab // Mimo Technik
-
Andre DeLeon ASTRO Mechanical Testing Laboratory
-
-
access_time 3:00 - 3:25 PM EDT
Tuesday, May 17
location_onRoom 140Cblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM EDT
Tuesday, May 17
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM EDT
Tuesday, May 17
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradePanel - Additive for Automotive: From Hyper-Customization to Mass Production
-
Fadi Abro Stratasys
-
Malini Dusey General Motors
-
Nelson Cosgrove Toyota Racing Development
-
Clive Hawkins Aria Group
-
-
access_time 3:30 - 3:55 PM EDT
Tuesday, May 17
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM EDT
Tuesday, May 17
location_onRoom 140Dblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradePrinting Tanks
-
Brandon Pender US Army Ground Vehicle Systems Center
-
Nanci Hardwick MELD Manufacturing Corporation
-
-
access_time 3:30 - 3:55 PM EDT
Tuesday, May 17
location_onRoom 140Eblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM EDT
Tuesday, May 17
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeAn Argument for Dedicated Training in 3D Printing for Surgeons: Results of a National Needs Assessment and Call to Action
-
Diana M. Otoya, MD VCU-SOM
-
Michael F. Amendola, MD Central Virginia VA Health Care System
-
-
access_time 3:30 - 3:55 PM EDT
Tuesday, May 17
location_onRoom 140Cblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeWalking the Walk: Going All-In on Metal Additive Adoption
-
Jason Jones, PhD Hybrid Manufacturing Technologies
-
Day 2: Wednesday, May 18
-
access_time 10:00 - 10:25 AM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM EDT
Wednesday, May 18
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM EDT
Wednesday, May 18
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeDevelopment of Antimicrobial Polymer-Metal Composites via Additive Manufacturing Methods
-
Arif Sirinterlikci, PhD, CMfgE Robert Morris University
-
Paul Badger, PhD Robert Morris University
-
-
access_time 10:00 - 10:25 AM EDT
Wednesday, May 18
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM EDT
Wednesday, May 18
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeContinuous Fiber Composite Additive Manufacturing
-
David Ivankovich Northrop Grumman Corporation
-
-
access_time 10:00 - 10:25 AM EDT
Wednesday, May 18
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM EDT
Wednesday, May 18
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM EDT
Wednesday, May 18
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM EDT
Wednesday, May 18
location_onRoom 140Fblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM EDT
Wednesday, May 18
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeFrom the Lab to the Court — Customizable Additive Materials for Sports Equipment
-
James Hedrick, PhD Azul 3D
-
Dr. Nadine Lippa Wilson Sporting Goods
-
-
access_time 10:30 - 10:55 AM EDT
Wednesday, May 18
location_onRoom 140Cblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeOn-Machine 3D Scanning for In-Process Inspection
-
Nasir Mannan, M.Eng Connecticut Center for Advanced Technology
-
-
access_time 10:30 - 10:55 AM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM EDT
Wednesday, May 18
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeOptimization of Fused Granular Fabrication Process Parameters of Conducting PEKK for Large Aerospace Structures
-
Si Chen, PhD Eaton Corporation
-
Felix Tran Eaton Corporation
-
-
access_time 10:30 - 10:55 AM EDT
Wednesday, May 18
location_onRoom 140Bblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Wednesday, May 18
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeDigital Foam: The Sports Equipment Revolution
-
Jon Walker , B.A., CMTSE EOS North America
-
Thierry Krick Advanced Product Development
-
-
access_time 11:00 - 11:25 AM EDT
Wednesday, May 18
location_onRoom 142blur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Wednesday, May 18
location_onRoom 140Fblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeData-Driven Qualification of Additively Manufactured 316L Stainless Steel
-
Joy Gockel ADAPT Center at Colorado School of Mines
-
Craig A. Brice Colorado School of Mines
-
-
access_time 11:00 - 11:25 AM EDT
Wednesday, May 18
location_onRoom 140Cblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Wednesday, May 18
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeFrom the Racetrack to the Manufacturing Line: How to Get Beautiful, High-Performance Parts in Serial Production (Case Study)
-
Michael Schorr DyeMansion North America Inc.
-
Kevin Sheehy Stratasys Direct Manufacturing
-
-
access_time 11:30 - 11:55 AM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Wednesday, May 18
location_onRoom 140Fblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Wednesday, May 18
location_onRoom 141blur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Wednesday, May 18
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade3D Printing for Surgical Planning of Canine Oral and Maxillofacial Surgeries
-
Yu-Hui Huang, MD, MS The University of Minnesota
-
-
access_time 11:30 - 11:55 AM EDT
Wednesday, May 18
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeThe Viability of Dense Photogrammetry as an AM Inspection Tool
-
Michael Agronin Direct Dimensions, Inc.
-
-
access_time 11:30 - 11:55 AM EDT
Wednesday, May 18
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Wednesday, May 18
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM EDT
Wednesday, May 18
location_onRoom 140Bblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM EDT
Wednesday, May 18
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM EDT
Wednesday, May 18
location_onRoom 140Fblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM EDT
Wednesday, May 18
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM EDT
Wednesday, May 18
blur_circularConferenceschoolAdoption -
access_time 2:00 - 2:25 PM EDT
Wednesday, May 18
location_onRoom 140Dblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeDesign Strategies for Architected Materials
-
Andreas Vlahinos, PhD Advanced Engineering Solutions
-
-
access_time 2:30 - 2:55 PM EDT
Wednesday, May 18
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeOutlook on Raw Material Quality Requirements for the AM Medical Industry
-
Frédéric Marion AP&C a GE Additive company
-
-
access_time 2:30 - 2:55 PM EDT
Wednesday, May 18
location_onRoom 141blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeStudy of Infill Pattern and Backfill of Low-Cost 3D Printed Polymer Tooling for Sheet Metal Forming Applications
-
Dan Zhang, PhD Center for Design and Manufacturing Excellence, The Ohio State University
-
-
access_time 2:30 - 2:55 PM EDT
Wednesday, May 18
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeHybrid Manufacturing Using Friction Stir Additive, Structured Light Scanning and CNC Machining
-
Tony L. Schmitz, PhD University of Tennessee, Knoxville
-
-
access_time 2:30 - 2:55 PM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 2:30 -2:55 PM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM EDT
Wednesday, May 18
location_onRoom 140Cblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM EDT
Wednesday, May 18
location_onRoom 140Dblur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM EDT
Wednesday, May 18
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeImproved Process Parameter Optimization Using Machine Learning
-
Zach Simkin Senvol
-
Tayelor McKay Northrop Grumman Corporation — Aeronautics Systems
-
-
access_time 3:00 - 3:25 PM EDT
Wednesday, May 18
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade3D Printing is Disrupting Construction
-
Philip Lund-Nielsen COBOD North America, Inc.
-
-
access_time 3:00 - 3:25 PM EDT
Wednesday, May 18
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeHybrid 3D Metal Device and Process Optimized for Producing Finished Components
-
Pavel Ikonomov, PhD Western Michigan University
-
-
access_time 3:00 - 3:25 PM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeSustainable Productivity – What Is in It for the AM Industry?
-
Gerret Lukas ACAM Aachen Center for Additive Manufacturing
-
-
access_time 3:00 - 3:25 PM EDT
Wednesday, May 18
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM EDT
Wednesday, May 18
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeIntelligent Digital Production Using the Divergent Adaptive Production System
-
Michael Kenworthy Divergent Technologies (Divergent 3D)
-
-
access_time 3:30 - 3:55 PM EDT
Wednesday, May 18
location_onRoom 140Dblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradePanel - Opportunities for Additive Manufacturing in Construction & Energy
-
Sofia Lopez COBOD International
-
Richard F. Neff Rick Neff LLC
-
Andreas Vlahinos, PhD Advanced Engineering Solutions
-
-
access_time 3:30 - 3:55 PM EDT
Wednesday, May 18
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeMicro 3D Printing for Disposable Medical Devices
-
John Kawola Boston Micro Fabrication (BMF)
-
-
access_time 3:30 - 3:55 PM EDT
Wednesday, May 18
location_onRoom 140Cblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradePanel - Pushing the Limits of Additive Manufacturing Through Design
-
Kyle Harvey Extol, Inc.
-
Joseph Kubalak, PhD Virginia Tech
-
Gaurav Ameta, PhD Siemens Technology
-
-
access_time 3:30 - 3:55 PM EDT
Wednesday, May 18
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeRecycling of Metallic Waste From Additive Manufacturing
-
Josh Lifshitz Globe Metal Recycling
-
-
access_time 3:30 - 3:55 PM EDT
Wednesday, May 18
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM EDT
Wednesday, May 18
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM EDT
Wednesday, May 18
location_onRoom 140Fblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradePanel - AM Hardware - Where do we go next?
-
Alex Kingsbury, BE, MAICD RMIT University
-
Tony L. Schmitz, PhD University of Tennessee, Knoxville
-
Day 3: Thursday, May 19
-
access_time 10:00 - 10:25 AM EDT
Thursday, May 19
location_onRoom 140Eblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradeWhy a 3D Printing Manufacturer Should Invest in DEI Today
-
Sarah Goehrke Nexa 3D // Women in 3D Printing
-
Kristin Mulherin Nexa3D
-
-
access_time 10:00 - 10:25 AM EDT
Thursday, May 19
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeOptimal Mechanical and Corrosion-Resistant Properties of AM-Metal Components by Post-Processing Combinatory Methods
-
Agustin Diaz, PhD REM Surface Engineering
-
Justin Michaud REM Surface Engineering
-
-
access_time 10:00 - 10:25 AM EDT
Thursday, May 19
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeThe VHA Experience of Using 3D Printing to Support Medical Device Manufacturing From the Hospital
-
Brian Strzelecki VA Ventures, The Veterans Health Administration
-
-
access_time 10:00 - 10:25 AM EDT
Thursday, May 19
location_onRoom 141blur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeUsing MELD to Improve and Maintain Bridge and Railway Infrastructure
-
Zackery McClelland US Army Corps of Engineers - ERDC
-
Nanci Hardwick MELD Manufacturing Corporation
-
-
access_time 10:00 - 10:25 AM EDT
Thursday, May 19
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradePaving the Way for Large-Scale Steel 3D Printing for Use in Shipbuilding
-
Kolby M. Pearson General Dynamics NASSCO
-
-
access_time 10:00 - 10:25 AM EDT
Thursday, May 19
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeAdditive Manufacturing in the Air Force Rapid Sustainment Office
-
Eddie Preston USAF, RSO/AMPO
-
Travis Grohoske RSO/AMPO
-
-
access_time 10:00 - 10:25 AM EDT
Thursday, May 19
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeAccurate Modeling of 3D Selective Laser Melting for Large Parts
-
John F. Maguire, DPhil DSc (UK) FSME FRSC Scientific Simulation Systems (S^3) Inc.
-
-
access_time 10:30 - 10:55 AM EDT
Thursday, May 19
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM EDT
Thursday, May 19
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradePost-Machining of Additively Manufactured Ti-6Al-4V
-
Bruce L. Tai, PhD Texas A&M University
-
-
access_time 10:30 - 10:55 AM EDT
Thursday, May 19
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeFuture-Proof Your Business & Career With 3MF
-
Luis Baldez 3MF Consortium
-
Duann Scott Bits to Atoms
-
-
access_time 10:30 - 10:55 AM EDT
Thursday, May 19
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM EDT
Thursday, May 19
location_onRoom 141blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeConductive Electronic Circuit Patterns with Liquid Metal Jetting
-
Dr. Denis Cormier Kate Gleason College of Engineering, RIT
-
-
access_time 10:30 - 10:55 AM EDT
Thursday, May 19
location_onRoom 140Dblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeAn Investigation Into the Feasibility of Producing a Copper-Nickel Alloy Utilizing Laser Powder Bed Fusion
-
John W. Ralls, PhD, PE Newport News Shipbuilding
-
Jared Blecher, PhD 3D Systems
-
-
access_time 10:30 - 10:55 AM EDT
Thursday, May 19
location_onRoom 140Bblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeInvestigation of the Mechanical Properties of Porous Bone Scaffolds, Composed of Polyamide, Polyolefin, and Cellulose Fibers
-
Roozbeh (Ross) Salary, PhD Marshall University (West Virginia State)
-
Robert Joyce FibreTuff
-
-
access_time 11:00 - 11:25 AM EDT
Thursday, May 19
location_onRoom 140Bblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradeImplant Guides With Indexed Printed Prosthetics: How Digital Dental Workflows Improve Patient Quality
-
Daniel B. Spagnoli, DDS, MS, PhD Brunswick Oral & Maxillofacial Surgery
-
Tyler Britt Brunswick Oral & Maxillofacial Surgery
-
-
access_time 11:00 - 11:25 AM EDT
Thursday, May 19
location_onRoom 141blur_circularConferenceschoolEvaluationmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Thursday, May 19
location_onRoom 140Eblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Thursday, May 19
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeGenerating End-Use Parts with 3D Printing and Electroplating
-
Analisa Russo, PhD Formlabs Inc.
-
Sean Wise RePliForm Inc.
-
-
access_time 11:00 - 11:25 AM EDT
Thursday, May 19
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Thursday, May 19
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM EDT
Thursday, May 19
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Thursday, May 19
location_onRoom 140Bblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradePanel - What's Next in Additive Manufacturing for the Healthcare Industry
-
Daniel B. Spagnoli, DDS, MS, PhD Brunswick Oral & Maxillofacial Surgery
-
Tyler Britt Brunswick Oral & Maxillofacial Surgery
-
Roozbeh (Ross) Salary, PhD Marshall University (West Virginia State)
-
Brian Strzelecki VA Ventures, The Veterans Health Administration
-
-
access_time 11:30 - 11:55 AM EDT
Thursday, May 19
location_onRoom 140Fblur_circularConferenceschoolOptimizationmonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM EDT
Thursday, May 19
location_onRoom 141blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeRemoving 3D Metal Parts From Build Platforms — Challenges and Solutions
-
Clay Olson EDM Performance Accessories
-
-
access_time 11:30 - 11:55 AM EDT
Thursday, May 19
location_onRoom 140Eblur_circularConferenceschoolEvaluationmonetization_onPaid UpgradePanel - Creating a DE&I Framework in the Additive Manufacturing Industry
-
Jeannine Kunz SME
-
SJ Jones Velo3D // Women in 3D Printing
-
Michael Jones, M.Div Xometry Inc.
-
Sarah Goehrke Nexa 3D // Women in 3D Printing
-
Kristin Mulherin Nexa3D
-
-
access_time 11:30 - 11:55 AM EDT
Thursday, May 19
location_onRoom 140Cblur_circularConferenceschoolOptimizationmonetization_onPaid UpgradeOptimization of Post-Processing 3D-Printed Parts
-
Cole M. Mathisen Mass Finishing, Inc.
-
-
access_time 11:30 - 11:55 AM EDT
Thursday, May 19
location_onRoom 140Dblur_circularConferenceschoolAdoptionmonetization_onPaid UpgradePanel - The Role of Additive Manufacturing in Heavy Industry
-
John W. Ralls, PhD, PE Newport News Shipbuilding
-
Mike Shepard 3D Systems
-
-
access_time 11:30 - 11:55 AM EDT
Thursday, May 19
location_onRoom 142blur_circularConferenceschoolOptimizationmonetization_onPaid UpgradePanel - The Industry Outlook Post Pandemic
-
Lin Kayser Hyperganic
-
Franck Mouriaux, MS Morf3D
-
Michael Sattler Solukon
-
