Skip to content

3D Printing—An Alternative to Injection Molding

By Nick Allen Managing Director, 3DPRINTUK


December 21, 2021 - 3D printing is unique as a disruptive technology in one key respect, and that is having disrupted the manufacturing paradigm through the introduction of rapid prototyping some 25 to 30 years ago. It is disrupting manufacturing again.

3DPRINTUK-Low-volume-production_768x432.jpg
3D printing has proved viable for production. The question now is, what is the sweet spot that makes the most of its capabilities?

This is based on the fact that today, 3D printing technologies have been refined to such an extent that they are truly viable production technologies. Now the conversation among manufacturers is around the most judicious use of 3D printing for production, what its advantages are, where the sweet spot is in terms of preferable volumes, what are the opportunities that exist through it use, and what are the barriers to entry?

Make or Buy

There will be few manufacturing enterprises that will not either have used or are flirting with the adoption of 3D printing at some level in 2021, be it as a complementary technology to existing legacy manufacturing processes, or indeed as an alternative. Many OEMs will be using desktop 3D printers for rapid prototyping, purely to get an early reasonably accurate 3D model of their product designs, but these printers are not designed for more exacting production applications, where repeatability and accuracy / tolerance attainment are vital.

The 3D printing machines that achieve production level repeatability and accuracy are typically costly beasts. Because of this, many potential users are put off by the large capital outlay required, and therefore approach 3D printing subcontract specialists, who not only have the levels of necessary high-quality 3D printing machines in-house but also the experience to get the most out of them.

The idea that 3D printing is a plug-and-play technology is a myth. Entry-level desktop model printers only require a modicum of knowledge to operate. But for production applications, achieving the necessary build parameters, quality, costs per part and timeliness of build requires a heap of experience, which subcontract agencies have in spades.

Injection Molding Pros, Cons

When it comes to producing plastic parts, 3D printing is working in a space where the conventional processing technology is injection molding.

plastic-bottle-mould-3dprintuk.jpg
Injection molding is still the go-to technology for high-volume plastic part production, but it is characterized by significant up-front capital investment in tooling.

Injection molding is still the go-to technology for high-volume plastic part production, but it is characterized by significant up-front capital investment in tooling, which is also time-consuming and difficult and expensive to adapt. The technology can use several molds at the same time, which means that it is ideally suited to the mass manufacturer of parts and components cost effectively—its cost effectiveness also promoted by the fact that there is minimal wastage as material is precisely dosed to match specific mold requirements.

In addition, while there is an increasing number of material options that can be used with 3D printing, it still cannot match the choice of materials compatible with injection molding.

A significant drawback, however, is the fact that there are design limitations inherent in injection molding, with some geometries being difficult to remove from the mold, and precise and delicate designs being difficult and expensive to mold accurately. Also, it is difficult, costly and sometimes impossible to correct tooling mistakes or change tooling to optimize or iterate new designs. Often, new tools are required, with all this implies in terms of cost and time—tools often taking weeks if not months to fabricate.


3D Printing Plastic Parts

3D printing exhibits a number of advantages when compared to legacy processes such as injection molding. The most important of these is the added flexibility 3D printing allows in design.

Most obviously, 3D printing can make components either impossible or expensive and difficult to achieve using injection molding, such as components that are hollow in certain areas. This is possible, as in 3D printing material is added in layers, and material density of the core can be altered. So, not only can some areas be hollow, but other critical areas can be reinforced. This means that 3D printing is a key facilitator when it comes to lightweighting, but with increased strength.

With 3D printing, ideal material conditions throughout a part are dictated by design, not by the vagaries of various production and post-production processes used.

3DPRINTUK-cover-image.jpg
3D printing requires no tooling and is agile, which facilitates quick production turnaround.

3D printing also promotes what can be called the consolidation of complexity. The technology can combine parts and features in one build that would otherwise have to be post-processed or assembled using conventional injection molding and allied technologies. And, printed parts can be more ergonomic and incorporate multiple parts and features that would be impossible or prohibitively expensive to achieve via the fabrication of highly complex injection molding tooling.

3D printing requires no tooling and is agile, which facilitates quick production turnaround. With 3D printing, part cost is not connected with part complexity. As soon as complexity is introduced to an injection molded part, the requirement is for more and more expensive mold tools, which leads to an exponential increase in costs until part production is no longer viable. As 3D printing adds material, complexity of design and different incorporated shapes do not affect the amount of time that it takes to produce a part, and therefore does not lead to increased costs.

Beyond non-costly part complexity, using 3D printing for production also facilitates nearly unlimited geometric freedom, exhibits very low to zero iteration costs, and has low downtime in the production cycle.

Conversely, injection molding makes design iterations costly. Beyond the high cost of upfront tooling, which as mentioned increases the more complex the part, production is restricted to the location of the production tooling. 3D printing technologies manufacture direct from 3D CAD files, so the location of manufacture is much more flexible.

Also, as 3D printing is a digital process, it can be stopped post-part build or post-run and started again without punitive cost. Production volumes can be exactly aligned with demand day to day, week to week, month to month. With injection molding, once the production process is initiated, it needs to fulfill the full run immediately to remain economic, which therefore necessitates the need for warehousing—which increases the cost per part.

3D printing is a highly reliable, cost-effective and relatively easy-to-use production technology for small- to medium-volume applications and can rival injection molding.

The Best Fit

Injection molding finds its sweet spot in large-batch production, where the requirement is for the manufacture of many thousands of identical products simultaneously. It is also best suited to robust designs based on one continuous form, and the process can produce products with superior smooth surface finish without the need for post-processing (which is typically needed with 3D printing parts).

komodo-simulations-3dprintuk-2.jpg
3D printing finds its sweet spot in the area of prototyping, and small to medium sized production runs of geometrically complex parts and components with gaps, holes or voids.

3D printing finds its sweet spot in the area of prototyping and small to medium-sized production runs of geometrically complex parts and components with gaps, holes or voids. It is also the best fit for the manufacture or parts where the design will frequently evolve or where customization is required, as design changes can be accommodated even in production.

These respective sweet spots are quite discrete and play to the fact that forward-thinking manufacturers could in fact be looking at 3D printing and injection molding as complementary processes rather than competitive processes. When used constructively together, for example, pre-production cycles can be dramatically shortened before large volume production is undertaken.


The Additive Future

It seems likely that moving forward, runs of perhaps 10,000 and below will soon be the domain of 3D printing, which for such volumes will render injection molding if not redundant, increasingly irrelevant when looked at through the prism of cost and time of production. However, injection molding will never be replaced, as it will typically be the technology of choice for higher volume runs.

Perhaps the biggest advantage of the use of 3D printing, however, is that although per part it is slow compared with injection molding, its advantages in terms of design freedom, creation of geometric complexity, and part consolidation all stimulate innovation. These factors alone may be a spur to using 3D printing for multiple smaller batch runs rather than bowing purely to the economics of using injection molding for high-volume manufacture.

Adaptation is Essential. Move Forward at RAPID + TCT.

Backed by industry leader SME, in partnership with Rapid News Group, RAPID + TCT is on the cutting edge of the AM industry and where you’ll:

  • See the latest products, applications and materials in action
  • Facilitate connections, idea-exchange and problem-solve
  • Connect with industry leaders focused on disruption

Attend North America’s largest and most influential additive manufacturing event dedicated to see the future of AM now.