Event Schedule
Tuesday, May 2
-
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid UpgradeUsing Additive Manufacturing to Support Point of Care Medical Device Manufacturing and Innovation
-
Brian Strzelecki VA Ventures, Office of Advance Manufacturing, The Veterans Health Administration
-
-
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid UpgradeWhy Would a Surgeon Do Their Own Segmentation?
-
Scott Kaiser Kaiser Orthopedics
-
-
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid UpgradeEvolution of Point-of-Care 3D Printing to Help Meet the Training Requirements of Medical Providers
-
Peter Liacouras, PhD Walter Reed National Military Medical Center
-
Nicole McMinn Walter Reed National Military Medical Center
-
-
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid UpgradeLearning Lessons on Implementing DICOM Encapsulation for a 3D Printing Healthcare Facility
-
Parham Gholami Rady Children's Hospital San Diego
-
Justin Ryan, PhD Rady Children's Hospital San Diego
-
-
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid UpgradeManufacturing for Design: A New Paradigm for Point-of-Care Manufacturing
-
David Dean, PhD The Ohio State University
-
-
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid UpgradeHow TPU Lattices Structures Enabled a Person with Limb Loss to Run a Marathon
-
Brent Wright, CP, BOCO EastPoint Prosthetics and Orthotics
-
-
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid Upgrade3D Printing Multimodal Physiological Data
-
Nicholas Jacobson University of Colorado Anschutz
-
James Weaver Harvard University
-
Wednesday, May 3
-
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
blur_circularConferencemonetization_onPaid UpgradeHow Are We Educating Clinical and Engineers Stakeholders Regarding 3D Printing at the Point of Care
-
Dr. Diana Otoya Central Virginia VA Health Care System
-
Dr. Michael Amendola Central Virginia VA Health Care System/VHA Office of Advance Manufacturing
-
-
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
blur_circularConferencemonetization_onPaid UpgradeMaking Customizable Radiological Phantoms a Reality with 3D Printing: Three Use Cases
-
Mariah Latshaw Boston Children's Hospital
-
Blair Kauzlarich Clarkson College
-
-
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
blur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
blur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
blur_circularConferencemonetization_onPaid UpgradeVacuum Heat Treatments of Laser-Powder Bed Fusion Nitinol Stents
-
Giorgio Valsecchi TAV VACUUM FURNACES
-
-
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
blur_circularConferencemonetization_onPaid UpgradeDedicated Training in 3D Printing at the Point of Care for Surgeons: VHA Dedication to Training Health Care Professionals
-
Dr. Michael Amendola Central Virginia VA Health Care System/VHA Office of Advance Manufacturing
-
-
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
blur_circularConferencemonetization_onPaid Upgrade
Thursday, May 4
-
access_time 10:00 - 10:25 AM CT
Thursday, May 4
blur_circularConferencemonetization_onPaid UpgradePartnerships Deliver Innovation to Patients at Veterans Affairs
-
Chris Richburg Veterans Affairs
-
Joseph Iaquinto, PhD Veterans Affairs
-
-
access_time 10:30 - 10:55 AM CT
Thursday, May 4
blur_circularConferencemonetization_onPaid UpgradeDemystifying Process Validation for Medical Device Manufacturing
-
Arrianna Willis Department of Veteran's Affairs Office of Advanced Manufacturing
-
Dmitry Levin Health Administration
-
-
access_time 11:00 - 11:25 AM CT
Thursday, May 4
blur_circularConferencemonetization_onPaid UpgradeAn Analysis of Medical Student Perceptions of Utilization of 3D Printing in Human Anatomy Education
-
Dr. Diana Otoya Central Virginia VA Health Care System
-
Dr. Michael Amendola Central Virginia VA Health Care System/VHA Office of Advance Manufacturing
-
-
access_time 11:00 - 11:55 AM CT
Thursday, May 4
blur_circularConferencemonetization_onPaid Upgrade -
access_time 12:00 - 12:25 PM CT
Thursday, May 4
blur_circularConferencemonetization_onPaid UpgradeUsing Micro 3D Printing to Accelerate Prototyping and Design Testing
-
John Kawola Boston Micro Fabrication
-
Mark Lattimore Tessy Plastics
-
