2023 Event Schedule
To watch RAPID + TCT 2023 presentations on-demand, please join the NEW SME Events+ App and Digital Experience.
Monday, May 1
-
access_time 8:00 AM - 4:00 PM CT
Monday, May 1
location_onRoom W183 Bblur_circularCertification Coursemonetization_onPaid UpgradeCertified Additive Manufacturing – Fundamentals (CAM-F) Review Course & Exam
-
Sheku Kamara Milwaukee School of Engineering
-
-
access_time 1:00 - 4:00 PM CT
Monday, May 1
blur_circularWorkshopmonetization_onPaid UpgradeCasting Workshop
-
Thomas Sorovetz T. A. Sorovetz LLC
-
Zayna Connor, PhD ZMC Consulting Inc. Casting Processes and Materials
-
-
access_time 1:00 - 4:00 PM CT
Monday, May 1
blur_circularWorkshopmonetization_onPaid UpgradeAdditive Manufacturing - How to Build A Business Case
-
Laura Ely The Barnes Global Advisors
-
John Barnes The Barnes Global Advisors
-
Kirk Rogers, PhD The Barnes Global Advisors
-
-
access_time 1:00 - 4:00 PM CT
Monday, May 1
blur_circularWorkshopmonetization_onPaid UpgradeAn Introduction to 3D Scanning and Metrology
-
Giles P. Gaskell Hexagon Manufacturing Intelligence
-
-
access_time 1:00 - 4:00 PM CT
Monday, May 1
blur_circularWorkshopmonetization_onPaid UpgradeReviewing Uncharted Applications of 3D Printing in Healthcare
-
Sarah A. Rimini Ricoh 3D For Healthcare
-
Justin Ryan, PhD Rady Children's Hospital San Diego
-
Bart Van der Schueren, PhD Materialise
-
Christian Hanson Mayo Clinic
-
Susmita Bose, PhD Washington State University
-
Peter Liacouras, PhD Walter Reed National Military Medical Center
-
Glenn Daehn, PhD The Ohio State University
-
Natalia Von Windheim, PhD Materials and Manufacturing (M4) Lab at The Ohio State University
-
Sara Belko The Health Design Lab at Thomas Jefferson University
-
Matthew Di Prima, PhD US Food and Drug Administration
-
CDR James Coburn USPHS
-
-
access_time 1:00 - 4:00 PM CT
Monday, May 1
blur_circularWorkshopmonetization_onPaid UpgradeRobust Additive Manufacturing Process Development for Industrialization
-
Youping Gao, PhD Castheon, an ADDMAN Group Company
-
Tuesday, May 2
-
access_time 8:30 AM - 2:30 PM CT
Tuesday, May 2
location_onFoyer/Hall F2blur_circularStudent Summitmonetization_onFree to High School Students and Staff -
access_time 8:45 - 10:00 AM CT
Tuesday, May 2
location_onMain Stageblur_circularKeynote Presentationmonetization_onIncluded with Expo PassBuilding and Scaling an Industrial Digital Manufacturing System
-
Kevin Czinger Divergent Technologies Inc.
-
-
access_time 10:00 - 10:45 AM CT
Tuesday, May 2
location_onMain Stageblur_circularIndustry Partner Presentationmonetization_onIncluded with Expo PassAM Digital Thread & Materials Data Generation
-
Richard Huff ASTM International
-
Josh Norman Raytheon Technologies Research Center
-
Nick Parry Additive Flow
-
Luke Scime, PhD Oak Ridge National Laboratory
-
Hunter MacDonald Hexagon
-
-
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
location_onRoom W183 Cblur_circularConferencemonetization_onPaid UpgradeLarge Format Additive Manufacturing at Lockheed Martin Aeronautics & Space
-
Scott Cochran Lockheed Martin Space
-
-
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeUsing Additive Manufacturing to Support Point of Care Medical Device Manufacturing and Innovation
-
Brian Strzelecki VA Ventures, Office of Advance Manufacturing, The Veterans Health Administration
-
-
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeOn the Use of LPBF 300 Grade Maraging Steel (Fe-18%Ni) for Aluminum Alloy Die Casting
-
Ehab Samuel, PhD National Research Council of Canada
-
Mihaela Vlasea, PhD University of Waterloo
-
-
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Tuesday, May 2
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeHybrid Agile Manufacturing for Future Armaments
-
James Zunino Army Futures Command DEVCOM
-
-
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
location_onRoom W183 Bblur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
location_onRoom W183 Ablur_circularConferencemonetization_onPaid UpgradeRoush Revs Up Production with Additive Manufacturing: A Stratasys Case Study of End-Use AM Parts for Automotive
-
Fadi Abro, MBA Stratasys
-
Kevin Sheehy Stratasys Direct Manufacturing
-
-
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeAdditive Manufacturing of Magnetic Materials for a New Generation of Electrical Drives
-
Tobias Neuwald Fraunhofer-Institute for Production Systems and Design Technology IPK
-
Janek Fasselt Fraunhofer Institute for Production Systems and Design Technology
-
-
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeUse of Carbon Nanotubes to Address Thermal Cracking in 6061 Aluminum and Haynes 230
-
Austin Tiley The Ohio State University
-
-
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeWhy Would a Surgeon Do Their Own Segmentation?
-
Scott Kaiser Kaiser Orthopedics
-
-
access_time 10:30 - 11:00 AM CT
Tuesday, May 2
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo Pass -
access_time 10:30 - 10:55 AM CT
Tuesday, May 2
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
location_onRoom W183 Bblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeEvolution of Point-of-Care 3D Printing to Help Meet the Training Requirements of Medical Providers
-
Peter Liacouras, PhD Walter Reed National Military Medical Center
-
Nicole McMinn Walter Reed National Military Medical Center
-
-
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeCombining Generative Design and Simulation Driven Lattice Structures for High Performance AM Designs
-
Andreas Vlahinos, PhD Advanced Engineering Solutions
-
-
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
location_onRoom W183 Ablur_circularConferencemonetization_onPaid UpgradeGenerative Design Optimization for Both End-Use and Tooling Parts in Automotive Applications
-
Nanzhu Zhao, PhD Nissan Technical Center North America
-
Yoshihisa Furuya, PhD Nissan Technical Center North America
-
-
access_time 11:00 AM - 12:00 PM CT
Tuesday, May 2
location_onMain Stageblur_circularAM Technical Community Leadership Committee Panelmonetization_onIncluded with Expo PassEnd-Use Parts: From Concept to Production
-
Sheku Kamara Milwaukee School of Engineering
-
Carolyn Seepersad University of Texas at Austin
-
John Barnes The Barnes Global Advisors
-
Ellen Lee, PhD Ford Motor Co.
-
Melanie Lang FormAlloy Technologies, Inc.
-
Ahmed El Desouky, PhD Veeco
-
-
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Tuesday, May 2
location_onRoom W180blur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 AM - 12:00 PM CT
Tuesday, May 2
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo Pass -
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeResonance Assisted Deposition Metal 3D Printing
-
Keng Hsu, PhD Arizona State University/Reverb Industrial
-
-
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid UpgradeBallistic Impact Performance of Additively Manufactured High Performance Metals
-
Brandon McWilliams, PhD DEVCOM Army Research Laboratory
-
-
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeMulti-Scale Power Optimization for Powder Bed Laser Fusion Additive Manufacturing
-
Erik Denlinger, PhD PanOptimization
-
Pan Michaleris, PhD PanOptimization
-
-
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeLearning Lessons on Implementing DICOM Encapsulation for a 3D Printing Healthcare Facility
-
Parham Gholami Rady Children's Hospital San Diego
-
Justin Ryan, PhD Rady Children's Hospital San Diego
-
-
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
location_onRoom W183 Ablur_circularConferencemonetization_onPaid UpgradePower Electronics Cooling Solution for the Automotive Sector Enabled Via Design for Additive Manufacturing
-
Sooky Winkler, PEng Dana Incorporated
-
Mihaela Vlasea, PhD University of Waterloo
-
-
access_time 11:30 - 11:55 AM CT
Tuesday, May 2
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeTransition to Net Zero Using Generative Design and Additive Manufacturing
-
Cassidy Silbernagel, PhD, PE Exergy Solutions Inc.
-
Joseph Flynn, PhD Altair
-
-
access_time 12:00 - 2:00 PM CT
Tuesday, May 2
monetization_onIncluded with Expo Pass -
access_time 12:00 - 12:45 PM CT
Tuesday, May 2
location_onMain Stageblur_circularIndustry Partner Presentationmonetization_onIncluded with Expo Pass3D Printing in Hospitals: RSNA 3D Printing Special Interest Group Initiatives & Perspectives
-
Peter Liacouras, PhD Walter Reed National Military Medical Center
-
Beth Ripley, PhD Office of Healthcare Innovation and Learning, U.S. Department of Veterans Affairs
-
Brian Strzelecki VA Ventures, Office of Advance Manufacturing, The Veterans Health Administration
-
Justin Ryan, PhD Rady Children's Hospital San Diego
-
-
access_time 12:30 - 1:00 PM CT
Tuesday, May 2
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo Pass3D-Printed Honeycomb Campus
-
Maggie Grout Thinking Huts
-
-
access_time 1:00 - 1:50 PM CT
Tuesday, May 2
location_onMain Stageblur_circularThought Leadership Panelmonetization_onIncluded with Expo PassRegulatory Considerations for Hospital-Based 3D Printing
-
Andy Christensen, FSME Fingerprint Additive
-
Beth Ripley, PhD Office of Healthcare Innovation and Learning, U.S. Department of Veterans Affairs
-
Ben Johnson 3D Systems
-
Matthew Di Prima, PhD US Food and Drug Administration
-
Joseph Lipman, MS Hospital for Special Surgery
-
Dr. Jonathan M. Morris Mayo Clinic
-
-
access_time 1:30 - 2:00 PM CT
Tuesday, May 2
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo Pass -
access_time 2:00 - 3:00 PM CT
Tuesday, May 2
location_onMain Stageblur_circularAM Technical Community Leadership Committee Panelmonetization_onIncluded with Expo PassCareer Forum Panel: Unsung Heroes in AM
-
Jennifer Coyne The Barnes Global Advisors
-
Lisa D. Block Hybrid Manufacturing Technologies
-
Fadi Abro, MBA Stratasys
-
Haley Cook Keselowski Advanced Manufacturing
-
Shawn Hopwood Dyndrite Corporation
-
-
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
blur_circularConferencemonetization_onPaid UpgradeComprehensive Experimental and Modeling Study of Laser Powder Bed Melt Pool Spatter
-
Jack Beuth, PhD Carnegie Mellon University
-
Nick O'Brien Carnegie Mellon University
-
-
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeApplication of Additive Manufacturing to Armament Systems
-
David Alfano US Army - DEVCOM Armaments Center
-
-
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeDevelopment of a High Strength Austenite Tailored for Additive Manufacturing
-
Andreas Mohr, PhD Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
-
-
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM CT
Tuesday, May 2
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeRheology-Driven Computational Framework for Fused Filament Fabrication Additive Manufacturing
-
Chukwuzubelu Ufodike, PhD, MPE, MBA Texas A&M University, College Station
-
-
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
location_onRoom W183 Bblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 3:00 PM CT
Tuesday, May 2
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo Pass -
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeManufacturing for Design: A New Paradigm for Point-of-Care Manufacturing
-
David Dean, PhD The Ohio State University
-
-
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeWhere Are We Going in AM Metal?
-
Kevin Ayers 3D Metal Konsulting
-
-
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Tuesday, May 2
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeQualification Across Multiple Machines for Powder Bed Fusion Stainless Steel 316L
-
Craig Brice, PhD Colorado School of Mines
-
-
access_time 3:00 - 3:45 PM CT
Tuesday, May 2
location_onMain Stageblur_circularIndustry Partner Presentationmonetization_onIncluded with Expo PassBridging the Biomaterial & Bioprinting Gaps Facing the Industry
-
Jared Matthews ARMI BioFabUSA
-
Adam W. Feinberg, PhD FluidForm
-
Adam E. Jakus, PhD Dimension Inx Corp.
-
Katie Weimer 3D Systems
-
-
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeHow TPU Lattices Structures Enabled a Person with Limb Loss to Run a Marathon
-
Brent Wright, CP, BOCO EastPoint Prosthetics and Orthotics
-
-
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
location_onRoom W180blur_circularConferencemonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradePart Production by AFSD, Measurement, and CNC Machining
-
Tony Schmitz, PhD University of Tennessee, Knoxville
-
-
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeSupport Structure Optimization for Powder Bed Fusion Processing
-
Pan Michaleris, PhD PanOptimization
-
Erik Denlinger, PhD PanOptimization
-
-
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM CT
Tuesday, May 2
location_onRoom W178 Ablur_circularConferencemonetization_onPaid UpgradeEconomic and Sustainability Considerations in Ceramic Additive Manufacturing
-
Scott Christensen SiNAPTIC Technologies
-
Beth Bornick Lithoz America, LLC
-
-
access_time 3:30 - 5:00 PM CT
Tuesday, May 2
location_onTECH HUB - Booth 4230blur_circularTech Hub -
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid Upgrade3D Printing Multimodal Physiological Data
-
Nicholas Jacobson University of Colorado Anschutz
-
James Weaver Harvard University
-
-
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeAluminum Parts Made by Additive Friction Stir Deposition
-
Shengmin Guo, PhD Louisiana State University
-
-
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeWorkforce Development at the COMET Center (Collaborative Operationalized Manufacturing Engineering Training)
-
Samuel Gatley The New Jersey Institute of Technology
-
-
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
location_onRoom W183 Cblur_circularConferencemonetization_onPaid UpgradeMulti-Scale Multi-Physics Modeling of Shape Memory Alloys to Accelerate Additive Manufacturing Maturation
-
Mohammad Elahinia, PhD The University of Toledo
-
Mohammadreza Nematollahi The University of Toledo
-
-
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
location_onRoom W180blur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM CT
Tuesday, May 2
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 5:00 - 6:00 PM CT
Tuesday, May 2
location_onMain Stageblur_circularNetworkingmonetization_onIncluded with Expo Pass
Wednesday, May 3
-
access_time 8:30 AM - 2:30 PM CT
Wednesday, May 3
location_onFoyer/Hall F2blur_circularStudent Summitmonetization_onFree to High School Students and Staff -
access_time 8:45 - 10:00 AM CT
Wednesday, May 3
location_onMain Stageblur_circularKeynote Presentationmonetization_onIncluded with Expo PassAdditive Manufacture for Space: Past, Present, and Future
-
Omar Mireles, PhD NASA Marshall Space Flight Center - In-Space Propulsion
-
-
access_time 10:00 - 10:25 AM CT
Wednesday, May 3
location_onRoom W183 Cblur_circularConferencemonetization_onPaid UpgradeIn-Space Additive Manufacturing of Electronics
-
George Kyriakou, PhD BotFactory, Inc.
-
-
access_time 10:00 - 10:25 AM CT
Wednesday, May 3
location_onRoom W180blur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Wednesday, May 3
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeMaking Customizable Radiological Phantoms a Reality with 3D Printing: Three Use Cases
-
Mariah Latshaw Boston Children's Hospital
-
Blair Kauzlarich Clarkson College
-
-
access_time 10:00 - 10:25 AM CT
Wednesday, May 3
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradePhotopolymer Additive Manufacturing at NIST: From Fundamental Science to Standards Development
-
Callie Higgins, PhD National Institute of Standards and Technology
-
-
access_time 10:00 - 10:25 AM CT
Wednesday, May 3
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeRapid Qualification of DoD Components
-
Robert Rhein, PhD Eaton Corporation
-
-
access_time 10:00 - 10:25 AM CT
Wednesday, May 3
location_onRoom W183 Ablur_circularConferencemonetization_onPaid UpgradeImproved Economics in Automotive Tool Making and Repair
-
Nils Niemeyer DMG MORI Additive Solutions
-
-
access_time 10:00 - 10:25 AM CT
Wednesday, May 3
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Wednesday, May 3
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeMulti-Material Directed Energy Deposition AM Across Two Bimaterial Systems
-
Jack Beuth, PhD Carnegie Mellon University
-
AJ Stair Carnegie Mellon University
-
-
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onMain Stageblur_circularHealthcare Additive Manufacturing Panelmonetization_onIncluded with Expo PassA Review of Risk Acknowledgement and Risk Mitigation in 3D Printing Activities
-
Gaurav Manchanda Formlabs
-
Elliott Hammersley UPMC 3D Printing Program
-
Gregory Voss Minneapolis VA Health Care System
-
Scott Brewer Ricoh USA, Inc.
-
-
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeHow Are We Educating Clinical and Engineers Stakeholders Regarding 3D Printing at the Point of Care
-
Dr. Diana Otoya Central Virginia VA Health Care System
-
Dr. Michael Amendola Central Virginia VA Health Care System/VHA Office of Advance Manufacturing
-
-
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onRoom W183 Bblur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onRoom W183 Ablur_circularConferencemonetization_onPaid UpgradeLow-Cost Water Atomized Powder Adoption and Benchmark Parts Production for the Automotive Sector
-
Mihaela Vlasea, PhD University of Waterloo
-
Amin Molavi-Kakhki, PhD RioTinto Fer et Titane
-
-
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onRoom W178 Ablur_circularConferencemonetization_onPaid UpgradeEcological Impact Assessment of Processing Sustainable IN718 Powder Material in Laser Powder Bed Fusion (LPBF)
-
Christian Weiss Fraunhofer Institute for Laser Technology ILT
-
-
access_time 10:30 - 11:00 AM CT
Wednesday, May 3
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo Pass -
access_time 10:30 - 10:55 AM CT
Wednesday, May 3
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeAdvanced Printing Composition with Synthetic Polymers and Aligned Natural Fibers for Biomedical Applications
-
Robert Joyce FibreTuff
-
Roozbeh (Ross) Salary, PhD Marshall University (West Virginia State)
-
-
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeResults of Evaluation of Solid-State Frictional Stir Additive Manufacturing for the United States Navy
-
Stephen Cox, CMfgE Naval Information Warfare Center Pacific, NIWC-PAC, NAVWAR, US Navy
-
Chase Cox, PhD MELD Manufacturing Corporation
-
-
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onMain Stageblur_circularHealthcare Additive Manufacturing Panelmonetization_onIncluded with Expo PassA Review of 3D Innovations from the Point of View of Early-career Engineers
-
Andy Christensen, FSME Fingerprint Additive
-
Victoria Sears Mayo Clinic
-
Parham Gholami Rady Children's Hospital San Diego
-
Nicole McMinn Walter Reed National Military Medical Center
-
-
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onRoom W180blur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Wednesday, May 3
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onMain Stageblur_circularHealthcare Additive Manufacturing Panelmonetization_onIncluded with Expo PassAn Overview of Operationalizing and Utilizing 3D Printing at Hcfs of Varying Size
-
Peter Liacouras, PhD Walter Reed National Military Medical Center
-
Blair Kauzlarich Clarkson College
-
Mariah Latshaw Boston Children's Hospital
-
Natalia Von Windheim, PhD Materials and Manufacturing (M4) Lab at The Ohio State University
-
-
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeAerosol Jet Printing of Copper Inks for Low and High Temperature Electronic Applications
-
Jian Yu, PhD DEVCOM Army Research Laboratory
-
-
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onRoom W183 Ablur_circularConferencemonetization_onPaid UpgradeBinder Jet Simulation and Compensation
-
Nic Sabo GE Additive
-
-
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 AM - 12:00 PM CT
Wednesday, May 3
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo Pass -
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeReturn of the Desktop Printers - How Desktop Machines are Making Progress Entering Industrial Manufacturing
-
David Walker, PhD Photopolymer Additive Manufacturing Alliance
-
Christina P. Perla Makelab
-
Spencer Loveless Merit3D
-
-
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeThermal Management Solutions for General Illumination Applications with Additive Manufacturing
-
Indika Perera, PhD Lighting Research Center, Rensselaer Polytechnic Institute
-
Nadarajah Narendran, PhD Lighting Research Center, Rensselaer Polytechnic Institute
-
-
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onRoom W178 Ablur_circularConferencemonetization_onPaid UpgradeUnderstanding the Environmental Impacts of Additive Manufacturing - A Comparative Analysis and the Strategic Business Implications
-
Sherri Monroe Additive Manufacturer Green Trade Association (AMGTA)
-
-
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM CT
Wednesday, May 3
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeEmpowering Distributed Manufacturing with 3D Printing
-
Wilderich Heising, PhD Boston Consulting Group
-
Gerret Lukas ACAM Aachen Center for Additive Manufacturing GmbH, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
-
-
access_time 12:00 - 12:45 PM CT
Wednesday, May 3
location_onMain Stageblur_circularProduct Presentationmonetization_onIncluded with Expo Pass -
access_time 12:30 - 1:00 PM CT
Wednesday, May 3
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo Pass -
access_time 1:00 - 1:50 PM CT
Wednesday, May 3
location_onMain Stageblur_circularThought Leadership Panelmonetization_onIncluded with Expo PassA Disruption of the Industrial Base; Large-Scale Metal Additive Manufacturing
-
LJ Holmes Harrisburg University of Science and Technology
-
Maj. Gen. Darren L. Werner U.S. Army Tank-automotive and Armaments Command, Army Materiel Command
-
Neal Orringer ASTROA
-
Jeffrey D. Ahrstrom, PhD Ingersoll Machine Tools
-
Brandon N. Pender US Army Ground Vehicle Systems Center
-
Nanci Hardwick MELD Manufacturing Corporation
-
-
access_time 1:30 - 2:00 PM CT
Wednesday, May 3
location_onTECH HUB - Booth 4230blur_circularTech Hubmonetization_onIncluded with Expo PassOne-Click to Custom Lattices with Ultrasim3D Lattice Engine
-
Florian Fischer BASF Forward AM
-
Stijn Paridaens ZiggZagg
-
-
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeImpact of Number of Grinding Passes and Wax Additive Content on the Characteristics of High-Density Polyethylene Filaments
-
Ergin Erdem, PhD Robert Morris University
-
Arif Sirinterlikci, PhD, CMfgE Robert Morris University
-
-
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:45 PM CT
Wednesday, May 3
location_onMain Stageblur_circularIndustry Partner Presentationmonetization_onIncluded with Expo PassPractical AM - Discussing the Business Case of Additive Manufacturing
-
Kimberly Gibson America Makes
-
Michael Cao IC3D Printers
-
Bryant Foster Oerlikon
-
Slade Gardner, PhD Big Metal Additive
-
Michelle M. Meyer MatterProviders
-
Roxanne Warren Morf3D
-
Ali Shabbir General Motors Company
-
-
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeMake Me a Product - The Digital Manufacturing of the Future
-
Robert Meshel Siemens Digital Industries Software
-
-
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
location_onRoom W183 Cblur_circularConferencemonetization_onPaid UpgradeDesign and Additive Manufacturing of a Continuous Fiber Iso Grid Structure
-
Nathan Stranberg Continuous Composites
-
-
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 2:00 - 2:25 PM CT
Wednesday, May 3
location_onRoom W183 Bblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
location_onRoom W183 Ablur_circularConferencemonetization_onPaid UpgradeAdditive Manufacturing of Cooling Structures for Carbon Dioxide Pressure Reduction
-
Janek Fasselt Fraunhofer Institute for Production Systems and Design Technology
-
Tobias Neuwald Fraunhofer-Institute for Production Systems and Design Technology IPK
-
-
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
location_onRoom W178 Ablur_circularConferencemonetization_onPaid UpgradeOptimizing Additively Manufactured Rocket Engine Component Performance via Chemical & Chemical-Mechanical Processes
-
Justin Michaud REM Surface Engineering
-
Agustin Diaz, PhD REM Surface Engineering
-
-
access_time 2:30 - 3:15 PM CT
Wednesday, May 3
location_onTECH HUB - Booth 4230blur_circularIndustry Partner Presentationmonetization_onIncluded with Expo PassLaser Additive Manufacturing: Current Position & Future Trends
-
Steven Glover Laser Institute of America
-
Rick Neff RICK NEFF, LLC
-
Neil S. Ball Directed Light
-
Youping Gao, PhD Castheon, an ADDMAN Group Company
-
-
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeHow to Get Started with Large Format 3D Printing
-
Maximilian Heres, PhD Loci Robotics, Inc.
-
-
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
location_onRoom W180blur_circularConferencemonetization_onPaid Upgrade -
access_time 2:30 - 2:55 PM CT
Wednesday, May 3
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeVacuum Heat Treatments of Laser-Powder Bed Fusion Nitinol Stents
-
Giorgio Valsecchi TAV VACUUM FURNACES
-
-
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeSimulation & Expertise Enabling Success in Large Scale Additive Manufacturing
-
Anthony Fiorini Techmer PM
-
Eduardo Barocio, PhD Composites Manufacturing and Simulation Center, Purdue University
-
-
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeDedicated Training in 3D Printing at the Point of Care for Surgeons: VHA Dedication to Training Health Care Professionals
-
Dr. Michael Amendola Central Virginia VA Health Care System/VHA Office of Advance Manufacturing
-
-
access_time 3:00 - 3:45 PM CT
Wednesday, May 3
location_onMain Stageblur_circularIndustry Partner Presentationmonetization_onIncluded with Expo PassBedrock: The Role of Data & Material Specifications in Industrializing AM
-
Kevin Slattery, PhD The Barnes Global Advisors
-
Tyler LeBrun, PhD Sandia National Laboratories
-
Ryan M. Hahnlen, PhD Honda Development & Manufacturing of America, LLC
-
Dave Abbott GE Aerospace
-
Elizabeth Crisler Textron Aviation
-
Richard Grylls Beehive Industries
-
-
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
location_onRoom W180blur_circularConferencemonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
location_onRoom W183 Ablur_circularConferencemonetization_onPaid UpgradeHeat Management through Topology Optimization and Lattice Structures
-
Marjan Molavi-Zarandi, PhD National Research Council Canada
-
Mathieu Brochu, PhD McGill University
-
-
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 3:00 - 3:25 PM CT
Wednesday, May 3
location_onRoom W183 Bblur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
location_onRoom W183 Bblur_circularConferencemonetization_onPaid Upgrade -
access_time 3:30 - 5:00 PM CT
Wednesday, May 3
location_onShow Floorblur_circularNetworkingmonetization_onIncluded with Expo Pass -
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeManufacturability of Multi-Material Metal Print Patterns
-
Ibai Mugica, PhD Flow Science Inc.
-
-
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
location_onRoom W183 Cblur_circularConferencemonetization_onPaid UpgradeMulti-Axis Pellet-Based Extrusion for Large Format Additive Manufacturing
-
Aywan Das University of South Carolina
-
Wout De Backer, PhD University of South Carolina
-
-
access_time 3:30 - 3:55 PM CT
Wednesday, May 3
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade
Thursday, May 4
-
access_time 8:45 - 10:00 AM CT
Thursday, May 4
location_onMain Stageblur_circularKeynote Presentationmonetization_onIncluded with Expo PassAM Industry Outlook: Opportunities and Challenges
-
Robert Willig SME
-
Terry Wohlers, MSc, Dr. h.c., FSME Wohlers Associates, powered by ASTM International
-
Chris Ciuca SAE International
-
Jeff DeGrange, FSME Impossible Objects Inc.
-
-
access_time 10:00 - 10:25 AM CT
Thursday, May 4
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 11:00 AM CT
Thursday, May 4
location_onMain Stageblur_circularAwards and Ceremoniesmonetization_onIncluded with Expo Pass -
access_time 10:00 - 10:25 AM CT
Thursday, May 4
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeGentle Giant... The Origin Story
-
Jason Lopes Gentle Giant Studios
-
-
access_time 10:00 - 10:25 AM CT
Thursday, May 4
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Thursday, May 4
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeProgress in Closed Loop Control for Additive Manufacturing
-
David Maass Flightware
-
John Middendorf, PhD Open Additive
-
-
access_time 10:00 - 10:25 AM CT
Thursday, May 4
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Thursday, May 4
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradePartnerships Deliver Innovation to Patients at Veterans Affairs
-
Chris Richburg Veterans Affairs
-
Joseph Iaquinto, PhD Veterans Affairs
-
-
access_time 10:00 - 10:25 AM CT
Thursday, May 4
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:00 - 10:25 AM CT
Thursday, May 4
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Thursday, May 4
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeMass Manufacturing with Large Format 3D Printing - from 50 to 500,000 Parts
-
Spencer Loveless Merit3D
-
Sally Tipping Photocentric Inc
-
-
access_time 10:30 - 10:55 AM CT
Thursday, May 4
location_onRoom W180blur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Thursday, May 4
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Thursday, May 4
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeDemystifying Process Validation for Medical Device Manufacturing
-
Arrianna Willis Department of Veteran's Affairs Office of Advanced Manufacturing
-
Dmitry Levin Health Administration
-
-
access_time 10:30 - 10:55 AM CT
Thursday, May 4
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeThe PICO Journey: The Importance of Additive Manufacturing in STEM Education
-
Michael Burghoffer PicoSolutions Group Inc.
-
-
access_time 10:30 - 10:55 AM CT
Thursday, May 4
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 10:30 - 10:55 AM CT
Thursday, May 4
location_onRoom W183 Cblur_circularConferencemonetization_onPaid UpgradeSelection of Engineering Materials for AM Metal Parts for Aerospace
-
Humna Khan ASTRO Mechanical Testing Laboratory
-
Andre Deleon ASTRO Mechanical Testing Laboratory
-
-
access_time 10:30 - 10:55 AM CT
Thursday, May 4
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:45 AM CT
Thursday, May 4
location_onMain Stageblur_circularIndustry Partner Presentationmonetization_onIncluded with Expo PassCommunicating More than Just Geometry for Additive Manufacturing with 3MF
-
Duann Scott 3MF
-
Daeho Hong nTop
-
Daniel Hambleton Metafold Inc.
-
Arvind Rangarajan, PhD HP Personalization and 3D Printing
-
Alexander Pluke Additive Flow
-
-
access_time 11:00 - 11:25 AM CT
Thursday, May 4
location_onRoom W183 Cblur_circularConferencemonetization_onPaid UpgradeWhy Settle for Wrought? How Optimized AM Material Properties Are Enabling Hypersonic and Space Flight
-
Jacob Rindler, PhD Castheon
-
Youping Gao, PhD Castheon, an ADDMAN Group Company
-
-
access_time 11:00 - 11:25 AM CT
Thursday, May 4
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeAdditive Manufacturing Coalition Congressional Legislative Update
-
Mark Burnham Additive Manufacturing Coalition
-
Lisa Arafune Additive Manufacturing Coalition
-
-
access_time 11:00 - 11:25 AM CT
Thursday, May 4
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeAn Analysis of Medical Student Perceptions of Utilization of 3D Printing in Human Anatomy Education
-
Dr. Diana Otoya Central Virginia VA Health Care System
-
Dr. Michael Amendola Central Virginia VA Health Care System/VHA Office of Advance Manufacturing
-
-
access_time 11:00 - 11:25 AM CT
Thursday, May 4
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:25 AM CT
Thursday, May 4
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeCobra/PUMA’s Sustainable Secret Weapon for Improving Golf Clubs
-
Stephen Serpe Arkema Inc.
-
Daniel Chelius COBRA Golf
-
-
access_time 11:00 - 11:25 AM CT
Thursday, May 4
location_onRoom W178 Ablur_circularConferencemonetization_onPaid UpgradeDigital Thread for Large Scale Polymer Hybrid Manufacturing
-
Alex Fitzgerald Center Street Technologies
-
Matt Heffinger Center Street Technologies
-
-
access_time 11:00 - 11:25 AM CT
Thursday, May 4
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM CT
Thursday, May 4
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeThree Ways to Grow Your Workforce
-
Noah Mostow, MS Visualize Manufacturing
-
-
access_time 11:30 - 11:55 AM CT
Thursday, May 4
location_onRoom W179 Ablur_circularConferencemonetization_onPaid UpgradeDeploying Cybersecurity for Large Scale Additive Manufacturing (LSAM)
-
Nicole Santos BreakPoint labs
-
William Glodek BreakPoint Labs
-
-
access_time 11:30 - 11:55 AM CT
Thursday, May 4
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM CT
Thursday, May 4
location_onRoom W183 Bblur_circularConferencemonetization_onPaid UpgradeMetal 3D-Printing for High Performance Titanium Bicycle Applications Pushing Bike Parts to the Next Level Using LPBF
-
Christian Lengwenat TRUMPF Laser - und Systemtechnik GmbH
-
-
access_time 11:30 - 11:55 AM CT
Thursday, May 4
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 11:00 - 11:55 AM CT
Thursday, May 4
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 11:30 - 11:55 AM CT
Thursday, May 4
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeThe Four Frameworks Essential to Exponentially Scale up Additive Manufacturing
-
Pavan Muzumdar, CFA Automation Alley/Project DIAMOnD
-
-
access_time 11:30 - 11:55 AM CT
Thursday, May 4
location_onRoom W178 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 12:00 - 12:25 PM CT
Thursday, May 4
location_onRoom W179 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 12:00 - 12:25 PM CT
Thursday, May 4
location_onRoom W185 B & Cblur_circularConferencemonetization_onPaid UpgradeThe Untold Value of a Professional Sabbatical
-
Joyce Yeung Seurat Technologies
-
Janet Kar Materialise
-
-
access_time 12:00 - 12:25 PM CT
Thursday, May 4
location_onRoom W183 Ablur_circularConferencemonetization_onPaid Upgrade -
access_time 12:00 - 12:25 PM CT
Thursday, May 4
location_onRoom W183 Cblur_circularConferencemonetization_onPaid Upgrade -
access_time 12:00 - 12:25 PM CT
Thursday, May 4
location_onRoom W183 Bblur_circularConferencemonetization_onPaid Upgrade -
access_time 12:00 - 12:25 PM CT
Thursday, May 4
location_onRoom W178 Ablur_circularConferencemonetization_onPaid UpgradeApplication of 3D Surface Texture Metrology for the Forensic Source Attribution of Additively Manufactured Parts
-
Thomas B. Renegar National Institute of Standards and Technology (NIST)
-
-
access_time 12:00 - 12:45 PM CT
Thursday, May 4
location_onMain Stageblur_circularIndustry Partner Presentationmonetization_onIncluded with Expo PassIncreasing AM Adoption through Sustainability
-
John Barnes The Barnes Global Advisors
-
Ashley R. Eckhoff Siemens PLM Software
-
Jonah Myerberg Desktop Metal
-
Adrien Lapeyre Arkema
-
-
access_time 12:00 - 12:25 PM CT
Thursday, May 4
location_onRoom W184 B & Cblur_circularConferencemonetization_onPaid UpgradeUsing Micro 3D Printing to Accelerate Prototyping and Design Testing
-
John Kawola Boston Micro Fabrication
-
Mark Lattimore Tessy Plastics
-
-
access_time 12:00 - 12:25 PM CT
Thursday, May 4
location_onRoom W180blur_circularConferencemonetization_onPaid UpgradeDigital Build Certification Approach for Directed Energy Deposition (DED)
-
Melanie Lang FormAlloy Technologies, Inc.
-
-
access_time 2:00 - 3:00 PM CT
Thursday, May 4
location_onSME ZONEblur_circularNetworkingmonetization_onIncluded with Expo Pass
Thursday, August 10
-
access_time 1:00 - 2:00 PM CT
Thursday, August 10
location_onDigital Experienceblur_circularInteractive Panel with Q&Amonetization_onIncluded with Expo PassMastering the Pivot: Senior Management's Perspective on Securing the Additive Industry in Times of Economic Downturn
-
Lisa D. Block Hybrid Manufacturing Technologies
-
Melissa E. Orme, PhD The Boeing Company
-
Christina P. Perla Makelab
-
Adeola Olubamiji, PhD D-Tech Centrix Inc
-
Camila Uzcategui, PhD Vitro3D
-
